UMD Application AN140 - Selection Guide - UMD Cash Drawers
Unique Micro Design (UMD) offers a range of cash drawers with interfaces to suit a variety of hardware and software configurations.
Features | Model 125 | Model 126 | Model 127 | Model 128 | |
Dimensions (mm) | 460(w)x460(d) x 125(h) | 420(s)x450(d)x110(h) | 460(w)x450(d)x110(h) | 410(w)x415(d)x110(h) | |
Colour | Beige | Beige | Beige, stainless steel drawer front | Beige, stainless steel drawer front | |
Weight | 11kg | 10kg | 8kg | 8kg | |
Note - compartments | 5 | 5 | 5 | 5 | |
Coin - compartments | 6 | 8 | 9 | 9 | |
Drawer Lock | 2 position | 3 position | 3 position | 3 position | |
Emergency release | Lever inside drawer | Lever under drawer at rear | Lever accessed through | Lever accessed through | |
Solenoid Rating | 18 - 24 V dc | 24 V dc | 24 V dc | 24V dc | |
Solenoid Resistance | 11ohm | 38.5ohm | 41 ohm | 37 ohm | |
Status Switch | No | No | Yes | Yes | |
Media Slot | No | No | No | No | |
Bell Installed | Yes | Yes | No | No | |
Accessories (1) |
|
|
|
| |
Base Cash Drawer(2) |
|
|
|
| |
Interface Options (4) |
|
|
|
| |
Suppliers Part Code | DL3610 Casio | CBM4085 | GC52 | GC33 | |
Features | Model 129 | CDY 410 | CDO 435 | ||
Dimensions (mm) | 480(w)x500(d)x125(w) | 410(w)x420(d)x110(w) | 440(w)x450(d)x120(w) | ||
Colour | Beige with stainless steel drawer | Beige | Beige | ||
Weight | 13kg | 7.5kg | 10.5kg | ||
Note - compartments | 5 | 5 Yes | 5 Yes | ||
Coin - compartments | 9 | 8 Yes | 10 5 Yes / 5 No | ||
Drawer Lock | 3 position | 3 position | 3 position | ||
Emergency release | Lever inside drawer | Lever under drawer at rear | Lever under drawer at rear(screw cover must be removed to access) | ||
Solenoid Rating | 24 V dc | 24 V dc | 24 V dc | ||
Solenoid Resistance | 26 ohm | 27 ohm | 46 ohm | ||
Status Switch | Yes | Yes | Yes | ||
Media Slot | Yes | Yes | Yes | ||
Bell Installed | No | No | No | ||
Accessories (1) |
|
|
| ||
Base Cash Drawer(2) |
|
|
| ||
Interface Options (4) |
|
|
| ||
Suppliers Part Code | GC80 | CDY-410 | CDO-435 | ||
Notes
(1) Part numbers shown for ordering.
(2) Base Cash Drawers are equipped with Solenoids only,
and designed to connect to POS printers such as the Citizen, Epson, Star
range of printers. The Base cash drawers are provided with either,
Modular connector, 4 way connector, or 3 way
(3)Connector type:
| Suitable POS printers and interface cables |
Modular connector | Suitable for direct connection to Epson, Star and Citizen POS printers with modular connector. |
4 pin connector | Suitable for direct connection to early Citizen IDP3500 series printers. For other printers an interface cable is required: |
3 pin connector | Not suitable for direct connection to most POS printers, requires an interface cable: |
(4) Interface options. UMD installs electronic modules
into the cash drawers for other interface requirements.
There are two modules T type (Trigger) and I type (Intelligent).
T-type (Trigger) These modules are connected to either an RS232 serial or parallel port (dependant on cable only). Any data sent to the port will trigger the cash drawer to open. Both T type drawer and printer may be connected to a single port via a "y" cable. This arrangement is generally suitable for most POS applications as cash drawers opens each time a receipt is printed. Cables for Triggers interfaces are shown below: | |
| Trigger cash drawer to: |
I-Type (Intelligent). Intelligent cash drawers are used where only a single serial port is available for POS peripherals. The Intelligent cash drawer has one serial port for connection to the host system or PC and a second auxiliary port for attachments to peripherals such as printers. The intelligent cash drawer looks for a specific, user configured, control sequence which opens the cash drawer. All other data is passed through to the auxiliary serial port. Interface cables available are listed below: | |
| Intelligent cash drawer host to: |
