UMD - Model A123 Series
UHF RFID Interrogator & Control Box Assembly

	The UMD Model A123 Series of RFID Interrogator & Control Box Assemblies are UHF RFID interrogators (readers) and associated electronics (controllers, communications, power supplies, input/output interface and software) housed in an industrial wall mountable box. Cable glands can be positioned on top or bottom of the control box and equipment mounting pan can be removed, providing flexible mounting options. The A123 is typically used to construct UHF RFID industrial portals, an also designed to mount to the UMD A200 Series of RFID Portal Frame Assemblies. Its modular design enables the rapid design and deployment of common industrial RFID reading portal system, and is customised for each installation. The system is also typical loaded with UMD’s standard embedded control software UMD-Edge.Net™ Industrial Control Box (600 x 400 x 200 mm) Various IP rated boxes Included RFID Reader and Input/Output Interface Top or Bottom Gland Mounting Options Can be customised

The UMD Model A123 Series of RFID Interrogator & Control Box Assemblies are UHF RFID interrogators (readers) and associated electronics (controllers, communications, power supplies, input/output interface and software) housed in an industrial wall mountable box. Cable glands can be positioned on top or bottom of the control box and equipment mounting pan can be removed, providing flexible mounting options.

The A123 is typically used to construct UHF RFID industrial portals, an also designed to mount to the UMD A200 Series of RFID Portal Frame Assemblies. Its modular design enables the rapid design and deployment of common industrial RFID reading portal system, and is customised for each installation.

The system is also typical loaded with UMD’s standard embedded control software UMD-Edge.Net™

Industrial Control Box (600 x 400 x 200 mm)
Various IP rated boxes
Included RFID Reader and Input/Output Interface
Top or Bottom Gland Mounting Options
Can be customised

Specifications

A123 Industrial UHF RFID Controller Configuration Guide

A123A								RFID Bollard Reader Assembly
	Housing Type
	5							IP55
	6							IP67
	P							IP67 Polycorbonate
		RFID Reader
		F1						Honeywell IF2 – 4 port POE+
		F2						Honeywell IF2 – 4 port POE+ with GPIO
		F3						Honeywell IF2 Ext Mem – 4 port POE+
		F4						Honeywell IF2 Ext Mem– 4 port POE+ with GPIO
		F5						Honeywell IF2 Ext Mem - 4 port POE+ with UMD GPIO
		Z4						Zebra FX7500 - 4 port POE+
			Embedded Controller
			0					None
			L					Linux Controller
			U					Advantech UNO-1150G with Windows XPE
				Network Switch
				0				None
				1				5 Port Switch (Advantech EK-2525P)
				2				POE+ Injector (Advantech EK-2401HPI)
				5				5 Port Switch with POE+ (LNP-0500-24)
				6				3 Port Switch with Wifi
				W				Wifi (Pico M2)
				C				4G Cellular Network Connection (LTE)
					Power Supply
					A			AC Input (240V)
					D			DC Input (24V)
					P			POE= Input
						Options
						00		Standard
						02		Manual Activation Switch (on-off) mounted to side
						30		Light Stick – 3 way (mounted on top)
						40		Vehicle Loop Detector (LD113B)
							Firmware
							00	Un-Programmed
							01	UMD Edge.Net
							02	UMD Edge Net – Slave
							XX	UMD Custom

A123A

**Ordering Information and Pricing**
Part Number	Model Number	Description	RRP Inc GST	T %
[A] UMD Model A123 Series RFID Control Box Reader Assembly
A123A

UMD - Model A123 SeriesUHF RFID Interrogator & Control Box Assembly

UMD - Model A123 Series
UHF RFID Interrogator & Control Box Assembly